Compaq SG3-100 Upgrading and Servicing Guide - Page 16
Align the two screw holes on the chassis with the two screw holes on the side of
View all Compaq SG3-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 Connect the power and data cables to the back of the hard disk drive. A - Connect to a primary hard disk drive. B - Connect to a secondary hard disk drive (select models only). C - Connect to the motherboard. 4 Slide the hard disk drive completely into the front of the chassis. 5 Align the two screw holes on the chassis with the two screw holes on the side of the drive labeled HDD, and then attach the two screws. 6 Replace the front and side panels, and then close the computer. See "Opening and Closing the Computer" on page 1. 12 Upgrading and Servicing Guide
12
Upgrading and Servicing Guide
3
Connect the power and data cables to the back of the hard disk drive.
A
— Connect to a primary hard disk drive.
B
— Connect to a secondary hard disk drive (select models only).
C
— Connect to the motherboard.
4
Slide the hard disk drive completely into the front of the chassis.
5
Align the two screw holes on the chassis with the two screw holes on the side of the
drive labeled HDD, and then attach the two screws.
6
Replace the front and side panels, and then close the computer. See “Opening and
Closing the Computer” on page 1.