Compaq dx2100 HP Compaq dx2100 MT Business PC Service Reference Guide (1st Edi - Page 63
System Board, Preparation for Disassembly, Access Panel, Front Bezel, Heatsink
View all Compaq dx2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.14 System Board 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel (Section 6.2, "Access Panel"). 3. Remove the front bezel (Section 6.3, "Front Bezel"). 4. Disconnect the power, and data cables from the back of all installed drives. 5. Disconnect all cables from the system board. 6. Remove the heatsink from the system board (Section 6.12, "Heatsink"). 7. Remove the 6 screws that secure the system board to the chassis 1. 8. Slide the system board towards the front of the chassis 2 then, angle the back of the board up to remove it 3. ✎ The system board in the computer may look slightly different from the one shown here. To install the system board, reverse the removal procedure. ✎ After installing a new system board, always update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system ROM BIOS can be found on the Web at: http:\\h18000.www1.hp.com/support/files. Service Reference Guide, dx2100 MT 404569-001 6-21