Compaq dx7510 Service Reference Guide: HP Compaq dx7510/dx7518 Business PC - Page 14
Computer Setup—Standard CMOS Features, Option, Description, Date mm:dd:yy, Time hh:mm:ss
View all Compaq dx7510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Computer Setup-Standard CMOS Features NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-3 Computer Setup-Standard CMOS Features Option Description Date (mm:dd:yy) Allows you to set system date. Time (hh:mm:ss) Allows you to set system time. Floppy Drive A Allows you to set Drive A to None or 1.44M, 3.5 inch. SATA Port 0 SATA Port 1 SATA Port 2 SATA Port 3 For each, allows you to: ● detect HDD size and head on selected channel ● set extended drive on selected channel to: ◦ None ◦ Auto ◦ Manual ● set access mode on selected channel to: ◦ CHS ◦ LBA ◦ Large ◦ Auto ● view: ◦ Capacity ◦ Cylinder ◦ Head ◦ Precomp ◦ Landing Zone ◦ Sector ● SMART Support ◦ SMART Status Check ◦ SMART Short Self-Test ◦ SMART Extended Self-Test SATA Mode Allows you to set the SATA mode to: ● IDE ● AHCI 6 Chapter 2 Computer Setup (F10) Utility