Compaq nc6110 HP Compaq nx6110, nc6110, nx6120 and nc6120 Notebook PCs - Maint - Page 114
Remove the hard drive connector, straight up to remove if from the hard drive.
View all Compaq nc6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Removal and Replacement Procedures 8. Remove the 2 Phillips PM2.5×4.0 hard drive frame shoulder screws 1 from each side of the hard drive. 9. Remove the 2 Phillips PM2.5×4.0 hard drive frame screws 2 from each side of the hard drive. 10. Remove the 2 Phillips PM1.5×3.5 hard drive frame screws 3 from the front of the hard drive. 11. Lift the frame 4 straight up to remove if from the hard drive. 12. Remove the hard drive connector 5 from the hard drive. Removing the Hard Drive Frame and Connector Reverse the above procedure to reassemble and install the hard drive. 6-8 Maintenance and Service Guide
6–8
Maintenance and Service Guide
Removal and Replacement Procedures
8. Remove the 2 Phillips PM2.5×4.0 hard drive frame shoulder
screws
1
from each side of the hard drive.
9.
Remove the 2 Phillips PM2.5×4.0 hard drive frame screws
2
from each side of the hard drive.
10.
Remove the 2 Phillips PM1.5×3.5 hard drive frame screws
3
from the front of the hard drive.
11. Lift the frame
4
straight up to remove if from the hard drive.
12. Remove the hard drive connector
5
from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to reassemble and install the
hard drive.