Compaq nc6230 Hardware-Software Guide - Page 174
Entering DriveLock Passwords, Requiring a Drivelock Password at Restart
View all Compaq nc6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Security Entering DriveLock Passwords 1. Be sure that the hard drive is inserted into the notebook (not into an optional docking device or external MultiBay). 2. When prompted for a DriveLock password, type your user or master password (using the same kind of keys you used to set the password), and then press enter. ✎ After 2 incorrect attempts to enter the password, you must restart the notebook and try again. Requiring a Drivelock Password at Restart You can require that a DriveLock password be entered each time the notebook is restarted. Enable and disable this feature in Computer Setup: 1. Shut down the notebook. If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power button, and then shut down the notebook through the operating system. 2. Be sure that the hard drive is inserted into the notebook (not into an optional docking device or external MultiBay). 3. Open Computer Setup by turning on or restarting the notebook. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. Hardware and Software Guide 12-15