Compaq nx6320 HP Compaq nc6300 Notebook PC and HP Compaq nx6300 Notebook PC - - Page 165
Remove the Torx8 T8M2.5×4.0 screw, on each side
View all Compaq nx6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Removal and Replacement Procedures 2. Disconnect the serial connector cable 1 and the Bluetooth cable 2 from the system board. 3. Remove the Torx8 T8M2.5×4.0 screw 3 that secures the system board to the base enclosure next to the RJ-11 connector. 4. Remove the two HM5.0×9.0 screw locks 4 on each side of the parallel connector. 5. Remove the two HM5.0×9.0 screw locks 5 on each side of the external monitor connectors. Removing the System Board Screws and Screw Locks Maintenance and Service Guide 5-63
Removal and Replacement Procedures
Maintenance and Service Guide
5–63
2. Disconnect the serial connector cable
1
and the Bluetooth
cable
2
from the system board.
3. Remove the Torx8 T8M2.5×4.0 screw
3
that secures the
system board to the base enclosure next to the RJ-11
connector.
4. Remove the two HM5.0×9.0 screw locks
4
on each side of
the parallel connector.
5. Remove the two HM5.0×9.0 screw locks
5
on each side
of the external monitor connectors.
Removing the System Board Screws and Screw Locks