Compaq nx7400 HP Compaq nx7300 and nx7400 Notebook PC Maintenance and Service - Page 150
Remove the three Torx8 T8M2.5×4.0 screws, Lift the rear edge of the system board frame
![]() |
View all Compaq nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Removal and Replacement Procedures 3. Remove the three Torx8 T8M2.5×4.0 screws 1 that secure the system board frame to the base enclosure. 4. Remove the audio board and USB board cables 2 from the base enclosure. 5. Lift the rear edge of the system board frame 3 until it disengages from the base enclosure. 6. Remove the system board frame. Removing the System Board Frame Maintenance and Service Guide 5-57
![](/manual_guide/products/compaq-nx7300-hp-compaq-nx7300-nx7400-notebook-pc-maintenance-service-guide-721e784/150.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–57
3. Remove the three Torx8 T8M2.5×4.0 screws
1
that secure
the system board frame to the base enclosure.
4. Remove the audio board and USB board cables
2
from the
base enclosure.
5. Lift the rear edge of the system board frame
3
until it
disengages from the base enclosure.
6. Remove the system board frame.
Removing the System Board Frame