Compaq nx9600 Hardware and Software Guide - Page 97

Entering DriveLock Passwords, Security > DriveLock, Password, Enter New Password, Enter DriveLock

Page 97 highlights

Security 3. Open the Setup utility by turning on or restarting the notebook. Press f10 while Setup message is displayed in the lower-left corner of the screen. 4. Use the arrow keys to select Security > DriveLock Password, and then press enter. 5. Read the warning, and then press enter. 6. Type the new password in the Enter New Password field, and then press enter. 7. Type the new password in the Confirm New Password field, and then press enter. 8. To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, and then press f10. 9. Press enter to continue. 10. To save your preferences and exit the Setup utility, press f10, and then follow the instructions on the screen. Your preferences are in effect when the notebook restarts. Entering DriveLock Passwords Each time you restart the notebook, you are prompted to enter the DriveLock password. To enter the DriveLock password: » Type the DriveLock password in the Enter DriveLock Password field, and then press enter. ✎ After 3 incorrect attempts to enter the password, you must restart the notebook and try again. Hardware and Software Guide 5-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199

Security
Hardware and Software Guide
5–13
3. Open the Setup utility by turning on or restarting the
notebook. Press
f10
while Setup message is displayed in the
lower-left corner of the screen.
4. Use the arrow keys to select
Security > DriveLock
Password,
and then press
enter.
5. Read the warning, and then press
enter.
6. Type the new password in the
Enter New Password
field,
and then press
enter.
7.
Type the new password in the
Confirm New Password
field,
and then press
enter.
8. To confirm DriveLock protection on the drive you have
selected, type
DriveLock
in the confirmation field, and then
press
f10.
9. Press
enter
to continue.
10. To save your preferences and exit the Setup utility, press
f10,
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Entering DriveLock Passwords
Each time you restart the notebook, you are prompted to enter the
DriveLock password.
To enter the DriveLock password:
»
Type the DriveLock password in the
Enter DriveLock
Password
field, and then press
enter.
After 3 incorrect attempts to enter the password, you must
restart the notebook and try again.