Corsair Padlock 2 8GB User Guide - Page 2

LED Indicators Your Flash Padlock comes with three different LED indicators on the top side of the unit. Each LED indicator, whether it's solid or flashing or appears with another LED indicator all provide feedback to you on the current state of the Flash Padlock. Review chart below to view the definition of each LED display option. LED Indication All indicators off Green LED blink Red LED blink Red and green LEDs blink in unison Red and green LEDs double blink Red and green LEDs lit Green LED lit Blue LED blinking Blue LED lit Alternating red and green LEDs blinking Explanation Drive is in sleep mode Drive is unlocked and ready for use Drive is locked Ready for user PIN input Ready for master PIN input Change of PIN initiated Drive is connected to USB port and unlocked Drive is active Drive is connected to USB port and unlocked Error User Operation Steps below show how users can Set or Change User PIN, and Lock or Unlock your Flash Padlock. Setting User PIN Your Flash Padlock comes out of the box without any set User PIN. Until the User PIN is set, your Flash Padlock is unsecure allowing any user access to view your files on the Flash Drive. We recommend you set a custom User PIN immediately upon receipt of your Flash Padlock. Directions 1. Press and hold the KEY button for 3 seconds. 2. Enter desired PIN using the PIN keys. A user PIN may be 4 to 10 digits long. 3. Press and hold KEY button. 4. Re-enter your PIN to confirm. 5. Press and release KEY button. Explanation Both red and green LEDs will illuminate. Both red and green LEDs will blink once and then remain lit. Both red and green LEDs will blink in unison. Green LED will flash. Unlocking your Flash Padlock using a User PIN Once a User PIN is set, all files stored on the Flash Padlock are secure and not viewable. In order to read, or write to your Flash Padlock, you must first unlock the drive with your User PIN. Directions 1. Press and release the KEY button. 2. Enter your user PIN using the PIN keys. Explanation Both red and green LEDS will blink in unison. 3. Press and release the KEY button. Green LED will blink for 20 seconds. 4. Insert drive into USB port. Green LED will remain lit while unit is connected to USB port. Note your Padlock will automatically lock if the device hasn't been inserted into a computer within 20 seconds. 2