Craftsman 11543 Operation Manual - Page 10

UNPACKING This product requires assembly. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the tool carefully to make sure no breakage or damage occurred during shipping. [] Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. [] If any parts are damaged or missing, please call 1-800-932-3188 for assistance. PACKING LiST Hammer Drill with Auxiliary Handle Assembly Battery Pack (2) Bits (2) Charger Carrying Case Operator's Manual ,_ WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. A WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. A WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. ASSEMBLING AUXiLiARY HANDLE See Figure 2. An auxiliary handle is packed with the drill for ease of operation and to help prevent loss of control. [] Insert and push screw all the way through slot on drill. [] Attach plate and auxiliary handle to screw and tighten. [] Insert end of depth stop rod into slot on the back of the plate. DEPTHSTOPROD DEPTHSTOP ROD SLOT SCREW SLOT PLATE AUXiLiARY HANDLE Fig. 2 10