Craftsman 17713 Owners Manual - Page 7

Operation - sears

Page 7 highlights

Operation WARNING To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oilbase paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not use this vac as a sprayer for any flammable or combustible liquid. To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials. CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the vac for extended hours or when using it in a noisy area. The operation of any utility vac can result in foreign objects being blown into the eyes, which can result in severe eye damage. Always wear safety goggles complying with ANSI Z87.1 (shown on package) before commencing operation. Safety goggles are available at Sear retail stores. Your Craftsman two-gallon wet/dry vac is assembled at the factory and ready for use when you remove it from the carton. The unit is ready for dry vacuuming or blowing. After you plug the power cord into the wall receptacle, turn the unit "ON" by pushing the switch from position "0" to position "1". The symbols used on the switch are international symbols. The "0" is the "OFF" position and the "1" is the "ON" position. O= OFF I = ON

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Operation
WARNING
To reduce the
risk of fire or explosion,
do not operate
this vac in areas
with
flammable
gases,
vapors
or explosive
dust
in the
air. Flammable
gases
or
vapors
include
but are not limited
to: lighter fluid,
solvent
type cleaners,
oil-
base paints, gasoline,
alcohol
or aerosol
sprays.
Explosive
dusts include
but
are
not limited
to:
coal,
magnesium,
grain
or gun powder.
Do not vacuum
explosive
dust, flammable
or combustible
liquids or hot ashes. Do not use this
vac as a sprayer
for any flammable
or combustible
liquid. To reduce the risk
of health hazards from vapors
or dusts, do
not
vacuum
toxic materials.
CAUTION:
To
reduce
the
risk
of
hearing
damage, wear ear protectors
when
using
the
vac
for
extended
hours
or when
using
it
in
a noisy
area.
The
operation
of any
utility vac can
result
in
foreign
objects
being blown
into
the
eyes,
which
can
result
in
severe
eye
damage.
Always
wear
safety
goggles
complying
with ANSI
Z87.1
(shown
on
package)
before
commencing
operation.
Safety
goggles
are
available
at
Sear
retail
stores.
Your Craftsman
two-gallon
wet/dry
vac is
assembled
at the factory
and ready for use
when
you remove
it from the carton.
The
unit is ready for dry vacuuming
or blowing.
After you plug the power cord into the wall
receptacle,
turn the
unit "ON"
by pushing
the
switch
from
position
"0"
to position
"1". The symbols
used on the switch
are
international
symbols.
The
"0"
is
the
"OFF"
position
and
the
"1"
is the
"ON"
position.
O=
OFF
I
= ON