Craftsman 28180 Product Manual - Page 11
DO NOT operate - 9 5 amp
View all Craftsman 28180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Your router table has a precision-built electric switch box and it should be connected to only a 120-volt, 60-HZ AC power supply (normal household current), DO NOT operate on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat. If the router table does not operate when plugged into correct 120-volt, 60-HZ AC ONLY outlet, check the power supply° The router table comes with an 8-ft. power cord (no adapter needed). This Router Table has the following features: 50utfeed fence 11 Above-the-table 10, Dust Collection and Guard pter 3 Extended fence 1 Router table 8 Fastening 2 Integrated safety switch Back of the Switch 1, Oversized table (14-1/8" x 23-5/8") for a large, smooth, durable, work surface and improved sound absorption. Table height clearance is 11-1/4 in. to accommodate most fixed and plunge-based routers 2_ Integrated safety switch with two outlets, Single-socket capacity is t 5 Amps, total capacity is 20 Amps. 3. Extended fence provides maximum work piece support; the fence can be moved forward and backward 3-3/4 inch. 4. Infeed and outfeed fence can each be extended 2 in_ 5. Outfeed fence can be adjusted as much as 9/16-in. forward of the infeed fence for joining operations. & Vacuum adapter fits a 2-1/2 inch shop vacuum hose,, 7. Miter-gauge adjusts from 0° to 60 ° in both directions for increased stability in many difficult feed situations. 8. Fastening holes (11/32-inch dia.) allow the Router Table to be fixed to a stable work surface. 28180 Manual Revised 0743228 Page 11