Craftsman 358748200 Operation Manual - Page 8

Troubleshooting, Table

Page 8 highlights

TROUBLESHOOTTAIBNLGE ,_ WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that require unit to be operating. SYMPTOM Unit fails to operate. CAUSE 1. Switch in the OFF position. 2. Extension cord discon- nected. 3. Circuit breaker tripped, or fuse blown. 4. Mechanical failure Unit vibrates abnormally. 1. Mechanical failure REMEDY 1. Slide switch to ON position. 2. Reconnect extension cord. 3. Reset circuit breaker or fuse. 4. Contact Sears Service (see back cover). 1. Contact Sears Service (see back cover). Impeller will 1. Debris in air intake area. not turn freely. 2. Mechanical failure. 1. Clean unit. Remove any debris. 2. Contact Sears Service (see back cover).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

TROUBLESHOOTING
TABLE
,_
WARNING:
Always
stop unit and disconnect
from the power source
before
performing
all of the recommended
remedies
below
except
remedies
that re-
quire
unit to be operating.
SYMPTOM
Unit fails to
operate.
CAUSE
1. Switch
in the OFF position.
2. Extension
cord
discon-
nected.
3. Circuit
breaker
tripped,
or
fuse blown.
4. Mechanical
failure
REMEDY
1. Slide
switch
to ON position.
2. Reconnect
extension
cord.
3. Reset circuit
breaker
or
fuse.
4. Contact
Sears
Service
(see back cover).
1. Contact
Sears
Service
(see
back cover).
Unit
1. Mechanical
failure
vibrates
abnormally.
Impeller
will
1. Debris
in air intake
area.
1. Clean
unit. Remove
any
not turn
debris.
freely.
2. Mechanical
failure.
2. Contact
Sears
Service
(see
back cover).