Creative Aurvana Gold Aurvana Gold User Guide - Page 6

6. Left earcup indicator Connector / Port 7. Micro-USB charging connector 8. Audio Input connector 9. Invisible Microphone 10. NFC (Near Field Communication) pad Blue and green blinks simultaneously: in an active Creative ShareMe connection. Red and flashes once: powering off the headset. Red and blinks slowly: low battery level, charge the headset soonest. Red: charging headset. This goes off when headset is fully charged. Function Use the supplied USB cable for charging the headset via a laptop or computer. Use the supplied audio cable for a wired connection to nonwireless devices or when battery power runs out. Connect the smaller 2.5mm diameter plug to the headset (align the triangularshaped connector properly) and the larger 3.5mm diameter plug to your audio device. Noise suppression microphone for crystal clear communications and environmental sensing microphones for ANC processing. Tap your NFC-enabled mobile devices here to establish Bluetooth pairing and connection. Tap again to end connection. Technical Specifications: • Driver: 40mm Neodymium magnet • Frequency Response: 15Hz ~ 22kHz • Impedance: 32ohms • Sensitivity (1kHz): 105dB/mW • Noise Reduction Level: Up to 17dB (85%) • Wireless Technology: Bluetooth v3.0 • Bluetooth Profiles: A2DP, AVRCP, HSP, HFP (HD Voice ready) • Audio Codec: aptX, AAC, FastStream, mSBC, SBC • Content Protection: SCMS-T • Operating Frequency: 2402 ~ 2480 MHz • Operating Range: Up to 10m / 33ft • Power Supply: Rechargeable Lithium Ion battery, 3.7V, 620mAh • Charge via USB: 5VDC, 500mA • Charge / Play / Talk Time: 2 hours / 15 hours* / 21 hours* • Net Weight: 292g / 10.3oz FastStream allows low latency wireless bi-directional audio streaming and voice communication with Creative BT-W1 Bluetooth USB transceiver. HD Voice requires supported handsets and mobile networks * Without ANC