Creative WP-300 WP 300 manual - Page 6
Connector, Function - bluetooth headphone
UPC - 054651175365
View all Creative WP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Right earcup light indicator Green and blinks slowly: automatically searching and attempts to connect to the last paired device. Blue and blinks slowly: connected to a paired device. Blue and blinks rapidly: in pairing mode and is ready to pair with a new device. Red and blinks twice: powering off the headphones. Red and blinks slowly: low battery, charge headphones soonest. This is accompanied by a beep tone every 2 minutes. 6. Left earcup light indicator Red: charging headphones. Green: headphones fully charged. Connector Function 7.Micro- USB charging connector Use the supplied USB cable for charging the headphones via a laptop or computer. Technical Specifications: • Driver: 34mm Neodymium magnet • Frequency Response: 18Hz ~ 22kHz • Impedance: 32ohms • Sensitivity (1kHz): 102dB/mW • Wireless Technology: Bluetooth 2.1 + EDR (Enhanced Data Rate) • Bluetooth Profiles: A2DP (Wireless stereo Bluetooth), AVRCP (Bluetooth remote control) • Audio Codec: apt-X, SBC • Operating Range: Up to 10m / 33ft • Power Supply: Rechargeable Lithium Ion battery, 3.7V, 240mAh • Charge / Playback: 1 hour / 8hours • Net Weight: 107 g / 3.5oz