Cub Cadet 1X 221 LHP 1X 221 HP Operator's Manual - Page 15
Maintenance, Engine
View all Cub Cadet 1X 221 LHP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Maintenance 5. Tip the snow thrower back to the operating position and pull the starter handle a few times to see if it is difficult to pull. Off-Season Storage 6. If the starter is difficult to pull, remove the spark plug and If the snow thrower will not be used for 30 days or longer, follow pull the handle several times to ensure that any oil trapped the instructions below. in the head is removed. 1. Store the equipment in a clean, dry area. 2. If storing the snow thrower in an unventilated area, rustproof the machine using a light oil or silicone to coat the snow thrower. 3. Clean the exterior of the engine and the snow thrower. 4. Lubricate pivot points on control handle and extension spring at end of control cable with a light oil. CAUTION: Oil may come out of the spark plug hole when it is removed and the starter handle is pulled. 7. Inspect the spark plug. If it is wet, clean off any oil before re-installing. Engine Refer to the Engine Operators manual packed separately with your snow thrower for maintenance and adjustment information on your engine. 1. To access the oil drain and spark plug it is necessary to remove the lower panel. 2. Remove the three screws that secure the lower panel. Remove the lower panel by lifting up on the panel to free the tabs at the bottom of the panel from the tab slots and then pull back. See Figure 6-3. Figure 6-3 NOTE: The bottom of the panel has tabs that help hold it in place. NOTE: An oil drain extension kit is available separately. Contact your local Cub Cadet dealer or contact Cub Cadet's Customer Support for kit #753-06684. 3. Change the oil and/or the spark plug as instructed in your Engine Operator's manual. 4. Re-install the lower panel by placing the tabs in the tab slots, lifting the panel into place and secure with the three screws removed in step 2. Section 6 - Maintenance & Adjustments 15