Cub Cadet 945 SWE 945 SWE Operator's Manual - Page 11
Controls and Features
View all Cub Cadet 945 SWE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Controls and Features 4 Drive Control Speed Selector Shift Lever Headlight Chute Assembly Clean-out Tool Two-way Chute Control™ Auger Control Heated Hand Grip Wheel Steering Control Chute Directional Control Auger Auger Housing Skid Shoe NOTE: For detailed information on all engine controls, refer to the separate Engine Operator's Manual supplied with this unit. Speed Selector Shift Lever The speed selector shift lever is located in the right side of the handle panel and is used to determine ground speed and direction of travel. Forward There are six forward (F) speeds. Position one (1) is the slowest and position six (6) is the fastest. Reverse There are two reverse (R) speeds. One (1) is the slower and two (2) is the faster. Heated Hand Grips Can be turned on/off by a switch found on the dash panel. Skid Shoes Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces. Augers When engaged, the augers rotate and draw snow into the auger housing. Chute Assembly Snow drawn into the auger housing is discharged out the chute assembly. Headlight The headlight is located on the front of the handle panel. 11