Cub Cadet CC 550ES CC 550 ES Operator's Manual - Page 21
Problem, Cause, Remedy
View all Cub Cadet CC 550ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Problem Uneven cut Mower will not self propel Cause 1. Wheels not positioned correctly. 2. Dull blade. 1. Belt not installed properly. 2. Debris clogging drive operation. 3. Damaged or worn belt. Remedy 1. Place all four wheels in same height position (if equipped with individual height adjusters). 2. Sharpen or replace blade. 1. Check belt for proper pulley installation and movement. 2. Stop engine, disconnect spark plug boot, and clean out debris. 3. Inspect and replace belt. Section 8 - Troubleshooting 21
21
S
ECTION
8 — T
ROUBLESHOOTING
Problem
Cause
Remedy
Uneven cut
1.
Wheels not positioned correctly.
2. Dull blade.
1.
Place all four wheels in same height position
(if equipped with individual height adjusters).
2. Sharpen or replace blade.
Mower will not self propel
1.
Belt not installed properly.
2. Debris clogging drive operation.
3.
Damaged or worn belt.
1.
Check belt for proper pulley installation and
movement.
2.
Stop engine, disconnect spark plug boot,
and clean out debris.
3.
Inspect and replace belt.