Cub Cadet CS 2210 CS 2210 Operator's Manual - Page 8
Set-Up - owners manual
View all Cub Cadet CS 2210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Tow Bar To attach the tow bar: 1. Remove the spring pin and clevis pin from the end of the tow bar receiver. See Figure 3-3. 1 Set-Up Gas and Oil Fill-Up Refer to the separate engine owner's manual for additional engine information. 1. Add oil provided before starting unit for the first time out of the box. 2. Service the engine with gasoline as instructed in the separate engine owner's manual. WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition. WARNING: Never fill fuel tank indoors with engine running or until the engine has been allowed to cool for at least two minutes after running. Figure 3-3 2. Insert the tow bar into the receiver. 3. Reinsert the clevis pin through aligning holes in both the tow bar and the receiver. 4. Fasten with the spring pin to secure. See Figure 3-4. 4 2 3 Figure 3-4 8 Section 3 - Assembly & Set-Up