Cub Cadet PRO Z 772 L Operation Manual - Page 22

PRODUCT CARE MAINTENANCE SCHEDULE WARNING Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Turn off the engine, remove the key, disconnect the spark plug wire(s) and the negative battery cable to prevent unintended starting. Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Follow the Maintenance Schedule given below. This chart describes service guidelines only. Refer to the Engine Operator's Manual for engine maintenance items listed in the table below. Check Gasoline Level Check Hydraulic Hoses for Leaks Check Tires & Tire Pressure Before Each Use P Every 25 Hours Every 50 Hours Every 100 Every 400 Every 500 Hours Hours^ Hours After Mowing P P Check Deck, Mower & Hydro Drive Belts P Check Blades & Blade Bolt Tightness P Check Safety Switches for Proper Operation P Check Fluid Level in Transmission Oil Expansion Reservoir P Check/Clean Engine Intake Screens & Cooling Fans * P P Check/Clean Exhaust Manifold, Muffler Pipe & Muffler Shields * P P Check/Clean Top & Underside of Deck, Under & Around Spindle Covers & Belt Area * P P Check/Clean Around Fuses, Wiring & Wiring Harnesses * P P Check/Clean Around Transmission, Axle & Fans * P P Blow Out/Clean Pump Control Area Under Floor Pan P Blow Out/Clean Pedal Control Area Under Foot Rest P Lubricate Wear Points (see chart) P P Clean Engine Cooling Fins & External Surfaces * P Change Hydrostatic Fluid & Filter in Transaxles (Parker Transmissions) † P Change Hydrostatic Fluid & Filter in Transaxles (Hydro-Gear Transmissions) PP † - After first 300 hours, change hydrostatic fluid and filter in transaxles. ^ - Or yearly, whichever comes first. * - Perform more frequently under dusty conditions. 22