Cuisinart CCO-40BC CCO-40 Manual - Page 5

Cleaning Instructions, Suggestions

Page 5 highlights

Cleaning Instructions 1. Be sure the plug has been removed from outlet. 2. Remove can opener lever by lifting and pulling toward you. Wash by hand with hot, sudsy water. Dry thoroughly. 3. W ipe body of can opener with damp cloth. (Caution: Do not immerse in water.) 4. R eplace can opener lever by holding in the upright position and snapping it back into place. Suggestions This can opener will open virtually all standard size cans. It should not be used on cans that have alternate methods of opening (including but not limited to pull-tabs, rolling key and peel-off foil). It also should not be used with rimless cans or cans with angled corners. Cans with aluminum lids will not adhere to magnet. If there is a dent in the rim of the can, open other side or place the Power Cut™ blade beyond the dent. If the can opener stalls, use a light touch to turn the can to aid the cutting process.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

CLEANING INSTRUCTIONS
1. Be sure the plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you.
Wash by hand with hot, sudsy water.
Dry thoroughly.
3.
Wipe body of can opener with damp cloth.
(Caution: Do not immerse in water.)
4.
Replace can opener lever by holding in the upright
position and snapping it back into place.
SUGGESTIONS
This can opener will open virtually all standard size
cans. It should not be used on cans that have
alternate methods of opening (including but not
limited to pull-tabs, rolling key and peel-off foil). It
also should not be used with rimless cans or cans
with angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other
side or place the Power Cut
blade beyond the dent.
If the can opener stalls, use a light touch to turn the
can to aid the cutting process.