Cuisinart CPO-800 User Manual - Page 10
Cleaning And, Maintenance
View all Cuisinart CPO-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BREW PAUSE™ FEATURE This feature interrupts the flow of coffee from the basket to let you pour that first cup midbrew. Because the flavor profile of coffee brewed at the start of a cycle differs from that brewed toward the end, be aware that using this feature will weaken the flavor strength of the finished pot. NOTE: Removing carafe for more than 20 seconds during brew cycle may cause filter basket to overflow. CLEANING AND MAINTENANCE Always turn coffee brewer off and remove the plug from the electrical outlet before cleaning. Lift up the coffee brewer lid. Remove and discard the paper filter and ground coffee. The filter basket can be washed in warm, soapy water and rinsed thoroughly, or cleaned on the upper rack of the dishwasher. Dry all parts after use. Do not put any water in the unit once the filter basket has been removed. Wipe the area under the filter basket with a damp cloth. Remove the carafe from the heating plate. Discard any remaining coffee. The carafe and lid can be washed in warm, soapy water and rinsed thoroughly, or placed in a dishwasher. The carafe and carafe lid should be placed on the upper rack only. Do not use any scouring agents or harsh cleansers on any part of the coffee brewer. Never immerse base unit in water or other liquids. To clean base, simply wipe with a clean, damp cloth and dry before storing. Fingerprints and other blemishes on the housing can be washed off with soap and water or a nonabrasive cleaning solution. Wait for heating plate to cool, then wipe with a clean, damp cloth. Never use rough, abrasive materials or cleansers to clean the heating plate. Do not dry the inside of the water reservoir with a cloth, as lint may remain. Maintenance Any other servicing should be performed by an authorized service representative. Decalcification Decalcification refers to the removal of calcium deposits that form over time on the metal parts of your coffee brewer. The mineral content of the tap water in your area and the frequency of use affects the rate of the calcium buildup, which can affect the functioning of your coffee brewer and the flavor of your coffee. For best performance from your PurePrecision™ Pour-Over Coffee Brewer, we recommend cleaning it whenever CLEAN is flashing on your control panel. NOTE: Before decalcifying your unit, remove the charcoal water filter from the water reservoir. To clean: 1. Fill the water reservoir to capacity with a mixture of 1⁄3 white vinegar and 2⁄3 water. 2. Press MENU button 5 times to get to clean start. Press BREW/OFF to begin cleaning cycle. 3. When the cycle is completed, 5 beeps will sound and the coffee brewer will shut off. 4. If CLEAN flashes once more, repeat the cleaning procedure with a fresh solution of vinegar and water. NOTE: One cleaning cycle is usually sufficient. 5. When CLEAN remains off, run one cycle with a full reservoir of fresh, cold water to rinse the unit. 6. Return the charcoal water filter to the holder inside the water reservoir and your coffee brewer is ready to brew! 10