Cuisinart CPO-850P1 Quick Reference - Page 3

QUICK REFERENCE GUIDE SETUP AND USE 1. Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes. Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds (see complete instructions on page 8 of your instruction booklet). Insert the filter into the water filter holder. Open the water reservoir and place filter holder into the unit. 2. Pour desired amount of water into the water reservoir. A water level indicator is located on the front of the unit. 3. Insert the permanent stainless steel laseretched filter into the filter basket holder. Close the lid. Note: Check to make sure the filter basket is securely in place and lid is completely closed. 4. Select BREW/OFF to start the one-time rinse cycle. Once complete, your unit is ready to brew coffee. Follow instructions on page. 9 of instruction booklet to set preferences and brew your first pot. IMPORTANT! Do not throw away. Read before operating your new coffee brewer. Keep for future reference. These helpful hints are intended to be a supplement to the instruction booklet. In order to ensure proper operation and optimum performance, please read the entire instruction booklet. Please see reverse side for programming instructions.