Cuisinart CSB-175RP1 User Manual - Page 7
Cleaning And Maintenance, Tips And Hints
View all Cuisinart CSB-175RP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PULSE 1. Press and hold the LOCK/UNLOCK button. 2. Then press and hold the ON/OFF button. 3. Repeatedly press and release the ON/OFF button while continuing to hold down the LOCK/UNLOCK button to PULSE until ingredients reach desired consistency. CLEANING AND MAINTENANCE Always unplug the Smart Stick® Two-Speed Hand Blender before cleaning. Clean thoroughly after using. Remove the blending shaft from the motor body. Clean the motor body only with a sponge or damp cloth. Do not use abrasive cleaners which could scratch the surface. To clean the blending shaft, wash by hand in hot water using mild detergent. DO NOT USE DISHWASHER. Never immerse the motor body in water. If the appliance has malfunctioned or has been dropped or damaged in any way or is not operating properly, return the appliance to the nearest Cuisinart Repair Center for examination, repair or mechanical or electrical adjustment. TIPS AND HINTS 1. Liquid should not come closer than 1 inch from where the shaft attaches to the motor housing. 2. When using with a nonstick cooking surface, be careful not to scratch the coating with the edge of blender blade guard. 3. Do not immerse motor body housing in water or any other liquids. 4. Cut solid foods into ½-inch pieces for easier blending. 5. Pour liquid ingredients into the mixing cup first, unless recipe instructs otherwise. 6. Never operate the hand blender continuously for longer than 1 minute. For best results, allow 20-30 of seconds rest time in between 1-minute cycles. 7. To avoid splatter, be sure the protective blade guard on the blending shaft remains submerged in the liquid while blending. Never remove it from the liquid while the motor is running. 8. Do not let hand blender stand in a hot pot on stove while not in use. 9. Do not put fruit pits, bones, or other hard material into the blending mixture, as these are liable to damage the blades. 10. Do not fill mixing containers too full. The level of mixture will rise when blending, and can overflow. 7