Cuisinart CSO-300 Instruction and Recipe Booklet - Page 6

Additional Control Panel Icons Preheat - Preheat indicator will disappear once the oven has reached set temperature. Food should be placed in oven before selecting cooking function and starting oven as preheat time is minimal and incorporated into overall cooking time. Toast Shade - Scroll from 1 to 7 for light to dark toast. Always use crumb tray when toasting. Add Water - Add water indicator will illuminate and unit will continuously beep and shut off when the reservoir needs to be filled. Fill reservoir and replace on oven. Wait 30 seconds and press the program button. Oven will automatically resume from the point cooking cycle was interrupted. A full reservoir should run for approximately 2 hours on a steam function. Active heating elements - Illuminate which heating elements are on for individual cooking functions. Set Your Clock Plug the oven into a 120 volt AC outlet. The LCD display will be illuminated blue. Clock will read 12:00 am. To set clock, press and hold the program button until the time starts flashing. Scroll the dial to select am/pm and then press button to confirm. Scroll the dial to set hour and then press to confirm. Finally scroll the dial for minutes and then press to set. OVEN RACK POSITION GUIDE All of our recipes give you step-by-step directions and indicate how to position the oven rack for best results. Please refer to the diagram below. WARNING: Placing the rack in the lower rack position or in the upper broil position while toasting may result in a fire. Toast only in the middle rack position. Lower Rack Position Middle Rack Position Lower Broil Position Upper Broil Position 6