Cuisinart CWC-1800TS Owner Manual - Page 5

Installing & Maintaining, Your Air Filter, Wine Cellar Features, And Use, Interior Light Control

Page 5 highlights

INSTALLING & MAINTAINING YOUR AIR FILTER Your Wine Cellar has a removable air filter that helps keep the fan and motor free of dust and dirt. It is easy to install and remove, and should be cleaned every 3 months. To Install: Align the tabs on the air filter with the slots on the back of your Wine Cellar. Turn the filter counterclockwise to lock it in place. To clean: Remove the air filter and wash with warm, soapy water. Rinse thoroughly, dry completely, and re-install it in the back of the Wine Cellar. WINE CELLAR FEATURES AND USE Temperature Adjustments/Control Important note: In order to operate efficiently, thermoelectric products should be in an environment with an ambient temperature of less than 70°F (21°C). Touchscreen Controls To change temperature, press the (+) or (-) button until the desired temperature appears in the display. NOTE: White wine temperature is kept at a lower temperature than red wine. By pressing the (+) temperature button on the display you can increase the temperature; pressing the (-) temperature button will lower the temperature. Please note that the actual cabinet temperature in a thermal electric unit is dependent on the ambient temperature. You may set the cabinet temperature within range but the unit may not reach that temperature. For this model, when the ambient temperature is 77˚F, the lowest temperature that can be reached is 50-52˚F. When ambient temperature is 66˚, the cabinet temperature can reach approximately 39-41˚F. INTERIOR LIGHT CONTROL Your wine cellar also has a light for your viewing pleasure. The interior display light option allows you to showcase your personal collection of wines. To activate this feature, press the light button. This button is located on the control panel (see below). The interior light will remain on permanently until light button is pressed again. Under normal operation it is best for the light to remain off. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

5
INSTALLING & MAINTAINING
YOUR AIR FILTER
Your Wine Cellar has a removable air filter
that helps keep the fan and motor free of dust
and dirt. It is easy to install and remove, and
should be cleaned every 3 months.
To Install:
Align the tabs on the air filter with the slots on
the back of your Wine Cellar. Turn the filter
counterclockwise to lock it in place.
To clean:
Remove the air filter and wash with warm,
soapy water. Rinse thoroughly, dry
completely, and re-install it in the back of the
Wine Cellar.
WINE CELLAR FEATURES
AND USE
Temperature Adjustments/Control
Important note: In order to operate
efficiently, thermoelectric products should
be in an environment with an ambient
temperature of less than 70°F (21°C)
.
Touchscreen Controls
To change temperature, press the (+) or (-)
button until the desired temperature appears
in the display.
NOTE: White wine temperature is kept at a
lower temperature than red wine.
By pressing the (+) temperature button on the
display you can increase the temperature;
pressing the (-) temperature button will lower
the temperature.
Please note that the actual cabinet
temperature in a thermal electric unit is
dependent on the ambient temperature. You
may set the cabinet temperature within range
but the unit may not reach that temperature.
For this model, when the ambient temperature
is 77˚F, the lowest temperature that can be
reached is 50-52˚F. When ambient
temperature is 66˚, the cabinet temperature
can reach approximately 39-41˚F.
INTERIOR LIGHT CONTROL
Your wine cellar also has a light for your
viewing pleasure. The interior display light
option allows you to showcase your personal
collection of wines. To activate this feature,
press the light button. This button is located
on the control panel (see below). The interior
light will remain on permanently until light
button is pressed again. Under normal
operation it is best for the light to remain off.