Cuisinart DCC-1200P1 User Manual - Page 7

PROGRAMMING YOUR COFFEEMAKER TO BREW COFFEE 1. Turn the Function Knob to the Brew position. 2. Lift the Flip Switch up to the On position and release. The red On indicator light will illuminate and brew cycle will begin. TO TURN THE COFFEEMAKER OFF Simply press the Flip Switch down to the Off position and release. Note: To program the coffeemaker to shut off automatically, see To program the Variable Auto Off instructions below. PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME To set the time 1. Turn the Function Knob to Clock. a. Hours: Press and hold the Hour button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off. Note: When the number count passes 12, the PM light will be displayed on the LCD. b. Minutes: Press and hold the Minute button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time, turn the Function Knob to any other setting or simply wait until the numerals stop blinking. To program the Auto On 1. Set the desired Brew-Start time. a. Turn the Function Knob to Prog. b. Set the time you want coffee to begin brewing by using the minute and hour push-buttons. Follow the same instructions you used to set the time of day, in the To set the time section above. 2. Turn the Function Knob to the Auto On position. LCD will display the current time. 3. Lift and release the Flip Switch. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red light will come on as well, indicating that the brew cycle is starting. Both lights will go off when keep warm cycle ends. Note: To reactivate the auto-on feature to start brew cycle at the same time another day, simply lift and release the Flip Switch. The green auto-on light will illuminate. To program the Variable Auto Off 1. Turn the Function Knob to the Auto Off position. Press and hold the Hour button for 2 seconds. The clock display will start blinking. 2. Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the Hour and Minute push-buttons. (See To set the time) Decalcification Decalcification refers to the removal of calcium deposits which form over time on the metal parts of the coffeemaker. For best performance from your Brew Central® Coffeemaker, decalcify the base unit from time to time. The frequency depends upon the hardness of your tap water and how often you use the coffeemaker. The flashing self clean light will indicate when you should clean your coffeemaker. Self Cleaning If the self clean light begins to flash when the coffeemaker is turned on, it is telling you that the calcium buildup is interfering with the functioning of your coffeemaker and the flavor of your coffee. To clean, fill the water reservoir to capacity with a mixture of ¹/³ white vinegar and ²/³ water. Press the Self Clean button. When the self clean light glows, turn the coffeemaker on by pressing the flip switch to On. The self clean light will shine steadily. The coffeemaker is now in self clean mode. One cycle should be sufficient 6