Cuisinart DCC-1200P1 Quick Reference - Page 2

Quick Reference Guide Programming 1. To set the Time: Turn the Function Knob to Clock. Press and hold the Hour or Minute button until the clock begins flashing. Hold down the Hour or Minute button to scroll through the numbers. When desired time approaches, release the button and press repeatedly to advance one digit at a time. To finish, wait for the numbers to stop flashing. 2. To program the Auto-On: Turn the Function Knob to PROG, the AUTO ON LED will flash. Set the time you want coffee to begin brewing (follow "set the time" instructions). Once complete, turn the Function knob to AUTO ON and flip the switch to the ON position and release. The green indicator light will come on to remind you that the programming function is in use. 3. At the programmed time, the red On/Off indicator light will come on, indicating that the brew cycle is starting. 4. To start the brew cycle at the same time the next day, simply turn the knob to PROG. The green Auto-On will illuminate. 5. To program the Auto Off: Turn the Function Knob to Auto Off. Use the Hour and Minute buttons as in #1 (to set the time) to program your coffeemaker to shut off from 0 to 4 hours after brew cycle is finished. Brew Central™ 12-Cup Coffeemaker Please see reverse side for setup and use instructions. PG-26691