Cuisinart DCC 2200 DCC-2200 Manual - Page 7

PROGRAMMING YOUR COFFEEMAKER TO BREW COFFEE 1. Turn the function knob to "Brew." 2. Press the On/Off button and release. The red "On" indicator light will illuminate and brew cycle will begin. TO TURN THE COFFEEMAKER OFF Press the On/Off button and release. NOTE: To program the coffeemaker to shut off automatically, see To program the Variable Auto Off instructions below. PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME To set the time: 1. Turn the function knob to "Clock." a. Set Hour: Press and hold the "Hour" button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off. NOTE: When the number count passes 12, the PM light will be displayed on the LCD. b. Set Minutes: Press and hold the "Minute" button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time, turn the FUNCTION KNOB to any other setting or simply wait until the numbers stop blinking. To program the Auto On (brew start time) 1. Turn the function knob to "Prog." 2. Set the time you want coffee to begin brewing by using the minute and hour push-buttons. Follow the same instructions you used to set the time of day, in the To set the time section above. 3. Turn the function knob to "Auto On." LCD will display the current time. 4. Press the On/Off button and release. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red indicator will come on as well, indicating that the brew cycle is starting. Both lights will go off when keep warm cycle ends. NOTE: To reactivate the auto-on feature to start brew cycle at the same time another day, simply press the On/Off button and release. The green "auto-on" light will illuminate. To program the Variable Auto Off 1. Turn the function knob to "Auto Off." Press and hold the "Hour" button for 2 seconds. The clock display will start blinking. 2. Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the "Hour" and "Minute" buttons (see "To set the time"). 1 - 4 Cup Setting The 1- 4 cup setting button is used when you make small amounts of coffee. The 1-4 cup setting basically 'double heats' the water, making your smaller amount piping hot. To use: When making a smaller amount, press the 1-4 button on the control panel after turning on the unit. Power Loss Back-up One-minute protection in case a breaker trips, the unit is unplugged, or the power fails. It holds all programmed information, including time of day, auto on time and auto off time. MAKING COFFEE Before you make the first pot of coffee in your new Cuisinart® Brew Central® Coffeemaker, we recommend operating the coffeemaker once using only water and a paper filter. This will remove any dust or residues that remain in the system from the manufacturing process. 6