Cuisinart DCC-3000P1 Quick Reference - Page 2

Setup and Use 1. Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes (see complete instructions on pages 6-7 of your Instruction Booklet). Insert the filter into the water filter holder. Open the lid to the water reservoir and place inside. 2. Remove and fill water reservoir for number of cups you're brewing. Replace reservoir, pushing down firmly in place. 3. Insert the permanent gold tone or paper filter into the filter basket holder. Using the scoop provided, add 1 scoop of ground coffee per cup - you can adjust the amount to taste. Make sure the filter basket is securely in place and lid is completely closed. 4. Plug in unit, turn Function Dial to Brew, press the On/Off Button and the blue indicator will light up. To delay brew start, turn dial to Auto On. Green Auto On will light up. 5. When brew cycle is complete, five beeps sound and On/Off indicator light will turn off. Place mug or cup on drip tray and press lever to pour coffee. The cup area lights up when the lever is pressed to pour coffee. IMPORTANT! Do not throw away. Read before operating your new coffeemaker. Keep for quick reference. This guide is a supplement to the instruction booklet. To ensure proper operation and optimum performance, please read the entire Instruction Booklet. PG-26977A