Cuisinart DFP-3 DFP-3 Manual - Page 3

IMPORTANT UNPACKING INSTRUCTIONS This package contains a Cuisinart® 3-Cup Food Processor and the following standard parts: a clear work bowl, chute attachment, cover with feed tube, white pusher, metal chopping blade, slicing disc and shredding disc, ejector disc, adapter stem for discs, and spatula. CAUTION: CUTTING TOOLS HAVE VERY SHARP EDGES. READ THESE INSTRUCTIONS COMPLETELY BEFORE BEGINNING TO UNPACK. To avoid injury to yourself or damage to the 3-Cup Food Processor when unpacking: 1. Place box right side up on floor or low table. 2. Remove instruction booklet and other printed material. 3. Open unit carton and remove the instruction booklet and other printed material. You will see an inserted corrugated box containing the following parts: * Adapter stem for discs, a slim white cylinder placed on the inside of the work bowl cover. Remove this stem and place on workspace. * Packed upside down you will find the clear work bowl cover and white pusher. Hold cover by its rim and lift it straight up. Unwrap from polybag and remove white pusher. Remove cardboard insert. 4. Remove corrugated box from giftbox and place on table or other workspace. Carefully open: HANDLE DISCS WITH GREAT CAUTION. THEIR CUTTING BLADES ARE RAZOR SHARP. 5. The white chute bowl with the slicing and shredding discs remains inside the inserted box. Lift the cardboard insert off of the white chute bowl. Grasp the slicing disc by the center hub and carefully place on work surface. Lift off the next cardboard insert and place white chute bowl onto work surface to remove the shredding disc. Remove the last cardboard insert and polybag from white chute bowl. Remove the spatula from the inserted box. 6. The white motor base, clear work bowl, blade assembly and ejector disc remain in the box. Remove white ejector disc from top of work bowl. 7. The motor base and work bowl assembly are packed in a foam block. Remove the base assembly complete with this foam block. Place on table or workspace. 8. Gently pull base/work bowl assembly out of foam block. 9. Carefully remove cardboard insert from inside work bowl. 10. Unwrap base/ work bowl/blade assembly from polybag. BE SURE TO REMOVE METAL CHOPPING BLADE FIRST BEFORE REMOVING WORK BOWL FROM MOTOR BASE. 11. Carefully grasp top of white center section of blade and lift it straight up. DO NOT TOUCH METAL BLADES WHICH ARE RAZOR SHARP. Immediately place metal chopping blade in safe place on counter or table, well away from edge. Now remove cardboard rim from around center stem of work bowl. 12. READ INSTRUCTION BOOK CAREFULLY BEFORE ASSEMBLING OR USING 3-CUP FOOD PROCESSOR. 13. Save shipping carton and foam blocks. You may want to use them later to ship processor. NOTE: Remember to return your completed product registration card with all information carefully filled out. WHEN REMOVING BLADE: CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP. NOTICE This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. 2