Cuisinart DGB-800 User Manual - Page 13

TROUBLESHOOTING PROBLEM CAUSE SOLUTION The coffeemaker Filter door is not closed • Check to be sure that all components of the filter compartment are in place is beeping. • Close filter door (you will hear a click if the door is properly shut) Filter basket is not in place • Open filter door by pressing the filter door release button • Hook filter basket with cover onto door • Close filter door (you will hear a click if the door is properly shut) The brew cycle will not start Coffee grounds and filter • Remove filter and used coffee grounds from previous use are • Add new filter still in filter basket There is no water in the • Fill the water reservoir using the water level markings water reservoir Coffee is weaker There are not enough than usual beans in the hopper Strength setting is incorrect The coffeemaker is not grinding beans The hopper may be too full • Be sure there are enough beans in your hopper for the amount of coffee you intend to brew • Check your strength setting - displayed on the LCD screen • To change your strength setting, press the Strength Control button • Turn the coffeemaker off and unplug • Remove some of the beans from the hopper EMPTY appears in LCD display Coffee grounds and filter • Remove filter and used coffee grounds from previous use are • Add new filter still in filter basket CLEAN is flashing on the LCD when the unit is turned on Coffeemaker needs to be decalcified • Run a clean cycle - follow the decalcification directions on page 11 of Instruction Booklet The coffeemaker will not enter CLEAN mode The water reservoir is empty • Fill the water reservoir with decalcification mixture before turning the coffeemaker on - Follow the decalcification directions on page 11 of Instruction Booklet 13