Cuisinart GC-15 Instruction and Recipe Booklet - Page 5
Cleaning and Care.
View all Cuisinart GC-15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4. Carefully slide out the drip cup by pressing H. down on the tab, and gently pull out the cup to dispose of its contents (see figure H). Clean cup and replace in base. (See Cleaning and Care, page 6.) 5. Thoroughly clean grill/griddle plate. (See Cleaning and Care.) 6. Flip the plate over, and return to base. I. 7. Make sure that drip hole in plate lines up over drip cup (see figure I). 8. Reconnect the plug into a standard electrical outlet. Using the kebab feature 1. Assemble the unit with the grill/griddle plate, kebab drawer, and drip cup in their J. proper positions. Note: Grill/griddle plate must be on unit when using kebab feature. Please keep in mind that it is very hot when the unit is operating. 2. Turn the temperature control dial to desired temperature and preheat for approximately K. 8 to 10 minutes. 3. Prepare food according to your favorite kebab recipe and slide pieces onto skewers. (See figure J). 4. Pull drawer to open. Position skewers in the skewer slots so the star-like shape at the end of each handle is inserted into a gear L. slot in the front end of the kebab drawer. Close drawer securely. (See figures K and L). Note: If using large cubes of meat or seafood, you may be limited to the number of kebabs you can cook at once. 5. Press the kebab control switch to ON. The switch light will illuminate to let you know kebabs are rotating. 6. To check to see if kebabs are cooked, press the kebab control switch to stop skewers from turning and remove a kebab with a potholder. If more time is needed replace the skewer and press the kebab control switch to resume cooking. Using the hot dog feature 1. Assemble the unit with the grill/griddle plate, kebab drawer, and drip cup in proper positions. Note: The grill/griddle plate must be on unit when using hot dog feature. Please keep in mind that it is very hot when the unit is operating. 2. Turn the temperature control dial to desired temperature and preheat for approximately 8 to 10 minutes. 3. Assemble the hot dog rollers by slipping the kebab skewers through the holes in each end of the hot dog roller caps (See figure M). 4. Pull drawer to open. Position skewers with hot dog rollers in the skewer slots so the star-like shape at the end of each handle M. is inserted into a gear slot in the front end of the kebab drawer. (See figures N and O). 5. Using tongs, position the hot dogs in between two of the hot dog rollers. Five hot dogs will fit six hot dog rollers. Close drawer securely. N. O. 5