Cuisinart HFP-300 HFP-300 Manual - Page 6
Use And Care - store
View all Cuisinart HFP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Insert food chamber into base. 3. Twist food chamber on base to lock position. 6 2. Attach the food chamber assembly to the motorized base. With the handle in your right hand and holding the food chamber at a 15° angle, line up the line on the food chamber with the line on the housing. The driving end of the assembly must be fully inserted into the socket of the motorized base. Next, while pushing the food chamber assembly firmly in toward the handle, rotate the assembly counterclockwise until it is upright and it is centered with the handle. 3. Plug cord in and load the food chamber. For best results, it is important that the food be prepared and properly placed in the food chamber as follows: • Cut food so that it will easily fit into the feed tube. • Stack food upright into the feed tube for short pieces or vertically for longer pieces. 4. Begin processing by pushing down the switch and evenly pushing the food down, using the pusher. 5. The processed food will be released from the front of the unit, directly into your bowl or platter. USE AND CARE 1. Keep hands as well as spatulas and other utensils away from moving drums while processing food, to prevent the possibility of severe personal injury or damage to the food processor. A plastic scraper may be used, but only when the food processor motor is stopped. 2. Avoid contact with moving parts. Never push food down into feed tube by hand when slicing, shredding, or grating. Always use pusher. 3. The exterior of the drums are sharp. Store drums as you would other sharp objects, out of reach of children.