Cuisinart SS-20 User Manual - Page 9
Brewing Coffee
View all Cuisinart SS-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SETTING THE AUTO-ON TIME When you turn the Function knob to PROG, the previously selected Auto On time, or the default time (12:00) will flash. 1. Turn the Function knob to PROG. Use the Hour and Minute buttons as above to program your start-brew time. 2. Turn the Function knob to AUTO ON. Press the BREW/WARM button to activate the program. When you press BREW, the AUTO ON blue light will illuminate, indicating the AUTO ON function has been activated. LCD will display the current time. 3. AUTO-ON brew cycle begins. The blue light around BREW will flash slowly when the brew cycle begins at the time you have selected. When the brew cycle ends, BREW will come back on indicating the coffeemaker is ready for the next brew. NOTE: To start brew time at the same time the next day, simply make sure the Function knob is at AUTO ON and press and release Brew button once more. The blue Auto On light will turn on. SETTING THE READY TONE ALERT Set Ready Tone to ON for audible alert when brew cycle is complete. Set to OFF for no audible alert. BREWING COFFEE Follow instructions in Setting Up Your 10-Cup Coffeemaker on page 8. 1. Insert charcoal water filter Follow directions for the preparation and insertion of the filter on page 8. 2. Fill the water reservoir Open the Coffeemaker reservoir cover by lifting it up. Pour in the desired amount of water, using the water level indicator located at the side of the Coffeemaker. 3. Before brewing Make sure the thermal carafe is in position on the resting plate and the top cover is closed. Plug the cord into an electrical outlet. 4. Set preferences Push the BOLD button if would like a stronger brew. BOLD button will illuminate. 5. Add the ground coffee Remove the filter basket by grasping the handle and lifting straight up. Insert a #4 paper filter or permanent filter. Be sure that a paper filter is completely open and fully inserted in the basket. It may help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup. Adjust the amount according to taste. NOTE: The maximum capacity for ground coffee is 15 tablespoons for this Coffeemaker. Exceeding this amount may cause overflow if the coffee is too finely ground. Replace the filter basket in the filter basket holder and press firmly on cover to be sure it closes securely. 6. Brewing coffee Turn the Function knob to BREW, press the BREW button, and the blue indicator light will flash slowly. Or, set the AUTO ON function (see page 9) and the Auto On indicator will light. 7. After brewing When the brewing cycle has been completed, coffee will continue to stream from the filter for several seconds. When streaming completely stops, five beeps will sound and you can now enjoy your coffee. NOTE: Reservoir cover may be hot during and directly after brewing. Wait at least 10 minutes before opening. BREW PAUSE™ FEATURE This feature interrupts the flow of coffee from the basket to let you pour that first cup mid-brew. Because the flavor profile of coffee brewed at the start of a cycle differs from that brewed toward the end, be aware that using this feature will weaken the flavor strength of the finished pot. NOTE: Removing carafe for more than 20 seconds may cause filter basket to overflow. 9