Cuisinart SS-5 Owner Manual - Page 10
Brewing
View all Cuisinart SS-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Brewing 1. Remove water reservoir to fill. 8. Press the desired brew button (6, 8, or 10 oz.). The beverage will start to dispense momentarily. Selected brew button will flash while brewing. Note: To cancel brewing, simply press the selected brew size once again and the brewing process will be stopped. Caution: There is very hot water in the capsule chamber during the brewing process. To avoid risk of injury, do not lift the handle or open the capsule chamber during the brewing process. 2. Add water into the 40-ounce water reservoir. Replace on unit. 3. Press the Power button. 4. The Power and Brew buttons will illuminate. 5. Place mug on the drip tray. The drip tray can be removed to accommodate travel mugs. 6. Select a capsule. Note: Do not remove the foil lid or puncture the capsule. 7. Open the brew head and place a capsule in the brewing chamber. Caution: There are two sharp needles in the brewing chamber that puncture the capsule, one above and one below. To avoid risk of injury, do not put your fingers in the capsule brewing chamber. 9. Once fully dispensed, all lights will illuminate. Lift the handle, then remove and dispose of the used capsule. Close the brewing head. Caution: Capsule will be hot. 10. Enjoy your cup of coffee! Your brewer is ready to use again or you can power it off. Note: When Add Water LED starts to flash, no brewing can be done. Once you refill the reservoir, your unit is ready to brew. 10