CyberPower PDU15B2F10R User Manual - Page 4

Package Contents PDU (1) Mounting Brackets Cord Retention Tray (1/2/3/4 pcs - varies by model) Horizontal Installation Used (1 set) Vertical Installation Vertical Mounting Brackets (1 set) Used (1 set) (for 0U models only) Bracket Mounting Screws M4 X 6 (4pcs) Cord Retention Tray Mounting Screws M3 X 6 (4/8/12/16 pcs - varies by model) Keyhole Mounting Pegs (2pcs) with Screws M4 X 6 (2pcs) (for 0U models only) Cable Tie (12/ 15/ 21/ 24/ 30/ 36/ 45/ 48/ 57 pcs - varies by model) for Cord Retention Tray Ground Screw M4 X 6 (1 pcs) Documentation: User Manual DistriPbuotwioenr Unit User's Manual Product Registration Card Product Registration Card Check Before using, please check to ensure the package contains all the items shown above. If there are missing parts please contact CyberPower technical support at www.cyberpower.com or call 1-877-297-6937. Safety Precautions - Read the following before installing or operating the Power Distribution Unit (PDU): 1. CAUTION! Use ONLY the supplied hardware (including screws, pegs and cord retainer clips) to attach the mounting brackets. Using different hardware or improper installations may cause damage that is NOT covered by this warranty. 2. The PDU must only be plugged into a three-wire, grounded outlet on a circuit protected by a fuse or circuit breaker. Connection to any other type of power outlet may result in a shock hazard. 3. Do not use extension cords or adapters with this PDU. 4. Never install a PDU, or associated wiring or equipment, during a lightning storm. 5. Check that the power cord, plug, and socket are in good condition. 6. CAUTION! To prevent the risk of fire or electric shock, this PDU should be installed in a temperature and humidity controlled indoor area free of conductive contaminants. Do not install this PDU where excessive moisture or heat is present. For information on Cyberpower products, visit www.cyberpower.com 2