D-Link 1008TL User Guide - Page 9

Setup, Desktop or Shelf Installation, and make sure there is adequate ventilation around it.

Get D-Link 1008TL - Switch PDF manuals and user guides
UPC - 790069260216
View all D-Link 1008TL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Setup The setup of the Switch can be performed using the following steps:  The surface must support at least 5 kg (11.02 lbs).  The power outlet should be within 1.82 meters (6 feet) of the device.  Visually inspect the power cord and see that it is secured fully to the AC power connector.  Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate ventilation around it.  Do not place heavy objects on the Switch. Desktop or Shelf Installation When installing the DGS-1008TL on a desktop or shelf, the rubber feet included with the device must be attached first. Attach these feet on the bottom at each corner of the device. Gigabit Ethernet Switch installed on a Desktop or Shelf 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Setup
The setup of the Switch can be performed using the following
steps:
The surface must support at least 5 kg (11.02 lbs).
The power outlet should be within 1.82 meters (6 feet) of the
device.
Visually inspect the power cord and see that it is secured fully
to the AC power connector.
Do not cover the ventilation holes on the sides of the Switch,
and make sure there is adequate ventilation around it.
Do not place heavy objects on the Switch.
Desktop or Shelf Installation
When installing the DGS-1008TL on a desktop or shelf, the rubber
feet included with the device must be attached first. Attach these
feet on the bottom at each corner of the device.
Gigabit Ethernet Switch installed on a Desktop or Shelf
7