D-Link 1016T User Manual - Page 26
Connect to End Node, Connect to Hub or Switch
 |
UPC - 790069244469
View all D-Link 1016T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connect to End Node End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ-45 Ethernet/Fast Ethernet Net work Interface Card (NIC) and Ethernet ready routers. Use standard Ethernet cable to connect the Switch to end nodes. Switch ports will auto matically adjust to the hardware characteristics (MDI-II/MDI-X, speed, duplex) of the device to which it is connected. Switch connected to an end node Observe the guidelines for cable quality stated at the beginning of th is section. The Link/Act LEDs fo r each port lights green when the link is valid. 26
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21 -
22 -
23 -
24 -
25 -
26 -
27 -
28 -
29 -
30 -
31 -
32
-
33
 |
 |
26
Connect to End Node
End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ-45
Ethernet/Fast Ethernet Network Interface Card (NIC) and Ethernet ready
routers. Use standard Ethernet cable to connect the Switch to end nodes.
Switch ports will automatically adjust to the hardware characteristics
(MDI-II/MDI-X, speed, duplex) of the device to which it is connected.
Switch connected to an end node
Observe the guidelines for cable quality stated at the beginning of this section.
The
Link/Act
LEDs
for each port lights green when the link is valid.