D-Link 311U Manual - Page 16

Server Name: The name assigned to the Print Server. Location: (optional) Input a comment indicating where the Print Server is located. Admin Contact: (Optional) Administrator name for the Print Server. Password: By default the DP-311U does not have a password. This is a security risk; it is recommended that you enter a password for the Print Server. Port Name: This is the assigned name for the USB port. Description: (Optional) A brief description for the USB port. Speed: Printer port speed, High or Low. PJL Printer: This feature is used to support Hewlett-Packard PJL (Printer Job Language) standard for bi-directional printing. Connection Mode: Ad-Hoc refers to two or more 802.11b wireless devices that communicate directly with one another without using an access point or any connection to a wired network. Infrastructure refers to an 802.11 network in which wireless devices communicate with each other by first going through an Access Point (AP) or wireless router. ESS-ID: The workgroup name of your Wireless Network. All wireless devices must all have the same SSID to communicate on the Wireless Network. All D-Link Wireless devices have the default SSID of default, all lower case. Wireless Channel: Displays the channel information. Make sure your the setting here matches the setting on your access point. Transmission Rate: You can adjust the transmission rate to get the best signal possible depending on your usage and environment. WEP Key Encryption: 64 bit WEP encryption uses a 10 hexidecimal character key. 128 bit WEP uses a 26 hexidecimal character key. The WEP encryption key must match the WEP settings on your AP or wireless router to connect properly. WEP Encryption: Enter the WEP key that you wish to use in this field. Confirm WEP Key: After typing in your WEP key, confirm the WEP Key in this field. 16