D-Link AC3000 User Manual - Page 67
Channel Width 5GHz, Transmission Power
View all D-Link AC3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Section 3 - Configuration 2.4GHz / Primary 5GHz / Secondary 5GHz - Advanced Settings... Security Mode Choose None or WPA/WPA2-Personal (recommended). 802.11 Mode (2.4GHz) Select the desired wireless networking standards to use. The available options for the 2.4 GHz wireless network are Mixed 802.11b/g/n, Mixed 802.11g/n, or 802.11n only. 802.11 Mode (5GHz) Select the desired wireless networking standards to use. The available options for the 5 GHz wireless network are Mixed 802.11a/n/ac, Mixed 802.11n/ac, Mixed 802.11a/n, 802.11ac only, Mixed 802.11a only, or 802.11n only. Wi-Fi Channel Select the desired channel.The default is Auto (recommended). Transmission Power Select the desired wireless transmission power. Channel Width (2.4GHz) Select Auto 20/40 if you are using both 802.11n and non802.11n devices, or select 20 MHz if you are not using any 802.11n devices. Channel Width (5GHz) Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a devices, select Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are using 802.11a devices. HT20/40 Coexistence (2.4GHz) Visibility Status Enable or disable HT20/40 Coexistence. The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Time & Schedule - Schedule on page 89 for more information. D-Link DIR-3040 User Manual 63