D-Link ANT70-1000 User Guide - Page 4
Regulations - range
UPC - 790069287213
View all D-Link ANT70-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASNysTte2m4-RSeeqruiieresments Regulations Based ANT24-0700 Install Guide Please add some sentences in P4 as below "Use of high gain antennas need careful planning to conform with EU regulations and extra consideration to avoid causing a potential health hazard, Please always seek qualified professional installer in all cases. " "Outdoor Installations Although D-Link offers a range of quality outdoor antennas, please note these devices are designed only to be installed by a professional as there are EU regulations that need to be considered. Cable lengths and quality will affect the antenna gain dramatically." EIRP limitaton: ETSI point to multi-point point to point 2.4GHz~2.5GHz 20dBm ave. 23dBm peak. 5.15GHz~5.35GHz 5.47~5.725 23dBm 30dBm 5.75GHz~5.875GHz X FCC point to multi-point 36dBm point to point 30+6(antenna gain ) dBm then above 30dBm, one dB output power reduced, then 3dB antenna gain increased 23dBm 36dBm X 30+23(antenna gain) then above 30dBm, one dB output power reduced, then 3dB antenna gain increased Cable Loss Model ANT24-CB03N For outdoor use EIRP = Effective,Isotropic Radiated Power = Device Output Power + Antenna Gain - Cable Loss Cable Type LMR400 Length 3m Interface N plug to N jack Cable loss (dB) @ 2.4GHz 1 Cable loss(dB) @5GHz 1.75 ANT24-CB06N LMR400 6m N plug to N jack 1.85 2.7 ANT24-CB09N LMR400 9m N plug to N jack 2.6 3.8 ANT24-ODU03M LMR200 0.3m RP N plug to N plug 0.6 1.15 ANT24-ODU1M LMR400 1m RP N plug to N plug 0.6 1.15 ANT24-ODU3M LMR400 3m RP N plug to N plug 1 1.75 ANT24-DLK3M LMR200 3m RP SMA plug to N plug 2 3.45 Note: 1. The loss value includes two connectors ( around 0.3~0.4dB @ 2.4GHz, 0.39~0.52dB@5GHz). 2. The longer cable you use, the more attenuation it causes, therefore, the extended range might be shorten then a normal link with default cables. 3. To comply with EU regulation, please use longer cables which can cause enough attenuation value. 4. For more detail of connectors type, please refer to the appendix page.(P.34) 4