D-Link AX4800 Quick Install Guide - Page 1

ENGLISH Quick Installation Guide DIR-X4860/X5460 AX4800/AX5400 Mesh Wi-Fi 6 Router Setup and How To videos available here: YouTube.com/DLinkTutorials PACKAGE CONTENTS • AX4800/AX5400 Mesh Wi-Fi 6 Router • 2 x Detachable Antennas • Power Adapter • Ethernet Cable • Quick Installation Guide • Quick Installation Card INSTALLATION ANTENNA SETUP 1 Identify the gold and silver connectors on the provided antennas and attach them to the corresponding connectors on the router by twisting them on in / a clockwise direction. Note: It is best to keep the router in an open area for better wireless coverage. OPTION 1 D-LINK WI-FI APP SETUP 1 Download the D-Link Wi-Fi app and launch it. / OPTION 2 WEB BROWSER SETUP 1 Plug the router into a power source. Make sure that the power button / is on. Wait for the wireless LED's to be lit solid. D-Link Wi-Fi D-Link Wi-Fi 2 Tap Install New Device. Scan the QR code on the Quick / Installation Card. Follow the on-screen instructions to complete the setup. SETUP QR CODE Model Name: DEVICE Wi-Fi Name: dlink-XXXX Password: XXXXXXXX S/N: 123456789 2.4 5G 2 Connect your computer to the Wi-Fi details printed on the / Quick Installation Card. Type http://dlinkrouter.local./ or http://192.168.0.1 into a web browser. You will be asked for your Device/Admin Password. By default this password is "password". Type that in and follow the on-screen instructions to complete the setup. Wi-Fi Name: dlink-XXXX ModelName:DEVICE Wi-Fi Name: d-link-XXXX Wi-Fi Password: XXXXXXXX Password:XXXXXXXX S/N: 123456789 http://dlinkrouter.local./ or http://192.168.0.1 Admin Password = password dlink-xxxx Connect xxxxxxxxx xxxxxxxxx Admin Password: You're all good to go! Once the setup is complete, you can connect your devices using the Wi-Fi name (SSID) and password that you created during the setup. Enjoy the Internet! ? FREQUENTLY ASKED QUESTIONS VOICE ASSISTANTS Wi-Fi Name: dlink-XXXX ModelName:DEVICE Wi-Fi Name: d-link-XXXX Wi-Fi Password: XXXXXXXX Password:XXXXXXXX S/N: 123456789 Amazon Alexa Setup for D-Link Wi-Fi https://www.dlink.com/en/alexa Why can't I access the web-based configuration utility? Verify that http://dlinkrouter.local./ or http://192.168.0.1 has been correctly entered into your Web browser. Make sure that you are connected to the correct Wi-Fi Name/SSID and password printed on the Quick Installation Card. Why can't I access the Internet? Ensure that your modem/gateway is powered on. Also ensure that the Ethernet cable is securely connected to both the router and modem. Verify that the Internet LED is illuminated on your router. If you still cannot access the Internet, power off your modem and router and power them back on, wait until all the LED's are lit and try again. What do I do if I forgot my Wi-Fi password? If you forgot your password, you must reset your router. This process will revert all of your settings back to the factory defaults. How do I restore the router to its factory default settings? Locate the reset button on the rear panel of the router. With the router powered on, use a paper clip to hold the button down for 10 seconds. Release the button and the router will go through the reset procedure. i GPL CODE STATEMENT This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement at: https://tsd.dlink.com.tw/GPL The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. Written Offer for GPL and LGPL Source Code Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to: Snail Mail: Email: Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 [email protected] The Google Assistant Setup for D-Link Wi-Fi https://www.dlink.com/en/google-assistant TECHNICAL SUPPORT Having trouble installing your new product? D-Link's support website contains live chat, video tutorials, commonly asked questions, the latest user documentation and software updates for D-Link products. United States Website: http://support.dlink.com Telephone: (877) 453-5465 Canada Website: http://support.dlink.ca/DIR-X5460 http://support.dlink.ca/DIR-X4860 Telephone: (800) 361-5265 Tutorials: YouTube.com/DlinkTutorials 2020/09/24_90x130 v1.10(NA) 610000010200