D-Link AX4800 User Manual - Page 51
Enable DHCP-PD, SLAAC+RDNSS, SLAAC+Stateless DHCP, Stateful DHCPv6
![]() |
View all D-Link AX4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 Address Assignment feature. If Enable DHCP-PD is enabled in the previous LAN IPv6 Address Settings: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected DHCP-PD in LAN to the LAN interface. Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful Type DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Advertisement Lifetime Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server's IPv6 Range (Start) assignment. IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 Range (End) assignment. D-Link DIR-X4860 User Manual 46
![](/manual_guide/products/dlink-dirx4860-user-manual-1d2de8b/51.png)