D-Link COVR-X1862 Product Manual - Page 28
Point-to-Point-Tunneling Protocol if your Internet Service, PPTP Server, Username, Password
View all D-Link COVR-X1862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server: Enter the PPTP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Enter a maximum idle (in minutes) time during which the Internet Time: connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. If you selected Dynamic IP as the Address Mode: Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. COVR-X1860 HW:A1 FW:1.00 D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual 24