D-Link COVR-X1862 Product Manual 1 - Page 47
Network
View all D-Link COVR-X1862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Section 3 - Configuration Network This section will allow you to change the local network settings of Covr Point A and configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of Covr Point A. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management The default address to access the web configuration utility is Link: http://covrXXXX.local/ where XXXX is the last for digits of the devices MAC address. Here, you can replace "covr" with a different name. If you change the management link, you will be required to browse to the new URL in order to access the web UI. Local Domain Enter the domain name (optional). Name: Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use Covr Point A for a DNS server. COVR-X1860 HW:A1 FW:1.00 D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual 43