D-Link DAP-2610 User Manual - Page 41
AP Array, AP Array Scan
View all D-Link DAP-2610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
D-Link DAP-2610 User Manual AP Array AP Array Scan The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase ease of management. Click the Save button to let your changes take effect. Central WiFiManager and AP Array are mutually exclusive functions. Enable AP Array: Select the check box to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will use the same configuration. The configuration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array. AP Array Name: Enter an AP array name for the group here. AP Array Password: Enter an AP array password for the group here. This password must be the same on all the APs in the group. Scan AP Array List: Click this button to initiate a scan of all the available APs currently on the network. Connection Status: Display the AP array connection status. AP Array List: This table displays the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Members: This table displays all the current array members. The DAP-2610 AP array feature supports up to eight AP array members. 41