D-Link DAP-2690 Reference Manual - Page 4
Using - default ip address
UPC - 790069331244
View all D-Link DAP-2690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
AirPremier N Dual Band PoE Access Point Command Line Interface Manual 1 USING THE CLI The DAP-2690 can be accessed by Telnet. Using a Microsoft Windows system as an example, open the Command Prompt on the computer that will be used for configuring and managing the AP and enter telnet and the IP address of DAP-2690 in the first line. Using the default IP address as example, enter telnet 192.168.0.50 to cause the following screen to open: Press Enter in the screen above. The following screen opens: 1
AirPremier N Dual Band PoE Access Point Command Line Interface Manual
1
1
U
SING THE
CLI
The DAP-2690 can be accessed by Telnet. Using a Microsoft Windows system as an example, open the Command Prompt on the computer that will be used for
configuring and managing the AP and enter
telnet
and the IP address of DAP-2690 in the first line. Using the default IP address as example, enter
telnet 192.168.0.50
to
cause the following screen to open:
Press Enter in the screen above. The following screen opens: