D-Link DAP-X2810 User Manual - Page 28
Group Key Update Interval, Confirm Pass Phrase
View all D-Link DAP-X2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 3 - Configuration Encryption: When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index (1~4), Key, and Confirm Keys must also be configured. Key Type: Select HEX or ASCII. Key Size: Select 64-bit or 128-bit. Key Index (1-4): Select from the 1st to 4th key to be set as the active key. Key: Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu. WPA Mode: When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu. Cipher Type: Select Auto, AES, or TKIP from the drop-down menu. Group Key Update Interval: Select the interval during which the group key will be valid. The default value of 3600 seconds is recommended. Pass Phrase: When you select WPA-Personal, please enter a Pass Phrase in the corresponding field. Confirm Pass Phrase: When you select WPA-Personal, please re-enter the Pass Phrase entered in the previous item in the corresponding field. RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. Accounting Mode: Click the drop-down menu to enable or disable the accounting mode. Accounting Server: Enter the IP address of the accounting server. D-Link DAP-X2810 User Manual 28