D-Link DBA-2720P User Manual - Page 70
Adding a Single Device
![]() |
View all D-Link DBA-2720P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Click the filter selection in the top-right. 4. Check the information parameters to display the corresponding device information in the overview window. Check All to show all device information parameters. 8.2.2 Adding a Single Device 1. Navigate to the Configure > Access Point > Devices page. 2. Click Add device. 3. Fill out the required information. Device UID Device name Site Profile License Key Enter the device's Unique Identifier (UID) found on the label printed on the device. The UID may be listed in the format XXXX-XXXXXXXX or XXXXXXXXXXXX. When entering the UID, do not include dashes. Enter a name for the device. Select a Site to link this device to. Select a Profile for this device. The device will use the settings configured in that profile. [Optional] Enter the device license key. Note: Every new device will be issued a one year free license key. Once expired, an additional license must be purchased to continue using the device. 4. Click Save. 62
![](/manual_guide/products/dlink-dba1210p-user-manual-9059d03/70.png)